Club 80-90 Forums

I have now found the issue after tracing the wire into a loom which doubled back and joined into wires from the ignition switch. The wire had overheated and was badly frayed. I’m not sure why this would happen as the electrics are basically standard here apart from an immobiliser but maybe it had fr...

It is a 1987 t25 with the 1.9 dg petrol engine. I have dash lighting but no power on pin 8 of the 14 pin connector. I also don’t know if anything is powered off pin 1 which is marked instr on the clustermaster device. It also has no power. There is ignition power. Pin 1 of the 14 pin connector does ...

I have an electrical problem where there is no power to the instrument cluster on my 1.9 dg t25. There is no power coming in on pin 8 of the 14 pin connector to the cluster which is a black wire marked ignition on my cluster master replacement for the ribbon cable. It was all working fine. All fuses...

I am trying to understand an issue I am having with the control unit on my vw t25 1987 1.9 dg engine. It is an auto sleeper conversion with a Labcraft control unit This was working fine but I had problems with a split charge relay blowing fuses frequently so I changed it for a voltage sensing unit a...