Club 80-90 Forums

donation sent 

donation sent 

donation sent 

donation sent 

I have just refitted my tailgate glass after body repair work, I’m just double checking I’m wiring the heated rear screen in correctly? Harness through the tailgate with spade connector and ring connector onto glass spade and screwed into tailgate frame respectively, spade connector on other side of...

Thanks for the reply, I had looked at the manual and saw it said about connecting charger directly to service battery, which was the route I was going to go down, but as you say connecting it through the ctek units does the same thing and is looking like the easier option for my fitting too.

I have my electrics on a panel in the wardrobe. This photo shows my battery selector switch. http://i221.photobucket.com/albums/dd300/chill300c/perspex.jpg [/quote] Hi, sorry to butt in, just after a few answers regards your wiring setup as in picture please. Just got same system and getting ready f...

http://www.brick-yard.co.uk/VehicleSpec ... wering.htm" onclick="window.open(this.href);return false;
Check out this link, worked for me, i used the spring compressor option..

Thanks for the offer on the springs pionte but after the info i've got on here and a couple of very informative emails back from brickwerks i'm gona go with the pipe and slippers option of -30mm Avo's and Bilstein B4 shocks, no doubt i too will find it a bit higher after having the old Avo -60mm spr...

You will find the AVO springs you have on now are sh4gged and that's why they bottom out, Simon put a lot of time and effort in with AVO a few years ago and they are far better now. My advice would be go maybe -30mm and some Bilsteins with a full on camper, I have had the new -50mm on for around 3y...

Go here http://www.brickwerks.co.uk/index.php/t3-parts/t3-suspension/springs-and-dampers.html" onclick="window.open(this.href);return false; And choose between standard or performance AH now i get it, i went to the suspension/springs page seen the no products message and thought nowt here...

I did look at brickwerks site and he doesn't seem to be advertising any shocks or springs for sale! Does he only do supply and fit do you know?

When you say fit standard bilsteins are they different from the b6 varient? if so do you know the code for them, also that the pigtails that i need to check are on the rear springs only? as the front are square end springs?

I'm looking to change my suspension as mine is not good at the mo, bottoming out and wallowing around!!! At present i have an AVO 60mm lowered brickwerks kit on it fitted around 2006, been reading around and think it might be time to change the lot, i'm thinking of going back to standard height and ...

Do B6 Bilsteins fit lowered T25's ok? I too am in the same situation with my shocks, i have an AVO 60mm lowered brickwerks kit fitted and one of my front shocks is pretty much shot i think, wheel rubbing under arch on bumpy roads, so i'm also wondering if these bilstein shocks will run ok with the ...