Club 80-90 Forums

Ok its happened again, customer has reversed into a Petrol pump and bust my rear bumper. I can't find the thread where some one told me who made the body kit to my t25 Auto Sleeper but perhaps someone will be able to help again. I need to source a new rear bumper, I have fixed the bump but its only ...

if the temp senders been replaced by one from GSF then thats your problem. They have too high a resistance from cold so make the gauge read higher than it should,measured a few with my ohmeter and they all read about 8 or 9 ohms more than the original(leaking) one that i had. i tried a few before i...

Thanks.
Are clutches prone to wearing out prematurely on these vans

thanks guys. Had whole system flushed today , new thermostat and refilled with G12 plus. Still sits 1/4inch above red light no matter what. Fans kick in and out. Laser temp reader measured engine temp at different points for about 1/2 hour. Max temp seen was 90 just before the thermo opened then it ...

Can anyone tell me if its common for the clutches to wear out in the dog leg 1st 5 speed transmissions. I have a Camper which the clutch went when on hire. The chap, even after being told, took off in 2nd with loads of revs. I just knew by the end of the 7 day hire the clutch would burn out wit driv...

One of my hire vans has had the temp gauge reading somewhere in between the red warning light and max say 1/4 inch above the light and the light is about 1/2 way in the gauge. Is this correct. its been like it since I bought the van a month or so ago but I need to make sure. Any help please?? Frank ...

So I take it your allowed to use flexi to bridge the fridge flue to the outside of the van.
I have moved my fridge by about 2 ft was wondering if flexi would mean I didn't have to bore a new hole.
Frank

Daisy our Auto Sleeper has both Water and Waste tanks and I think there great.....apart from they can cause problems getting on a flat bed trailer if you ever transport the camper about. We have never had freezing problems but then again, Daisy isn't used much in the winter. :) Unless you have a wat...

Hacksawbob wrote:In electrical section?
Maybe a flexible vent flue I know Gunzl does them for Westfalias, search for part number 255070518A on http://www.vwbusshop.de/" onclick="window.open(this.href);return false;

Technically......it is an Electrical fridge as well

thanks guys, I havent been on line for a few days, my 73 Westi is giving me a real headache. Been working on her till past 10pm most nights in the workshop. Just done 144 hours on her in the last 2 weeks :shock: I dont want to bore another hole in the side of the van, it already had one for the heat...

Hi all, just bought an RVTEC New interior. My original fridge will now sit in a slightly different position. I will now have a hole in the side of the van which is no use and I wont have a flu hole for the new position. Question: Is it possible to get flexi flue. It has to move forward by about 12 i...

Whatever the cause of the problem is, the buzzer should not be influenced by lights/flashers, etc. It seems like the Oil Pressure warning system has been modified given that an alternative LED is fitted. The Oil pressure LED on Vans (with Oil Pressure warning system) is controlled by the same circu...

the BoD sounds like a failing relay only louder . :ok thats exactly what it sounds like but it seems to have a volume control when you put electrical items on. :cheese as i first said, sounds like a wiring issue , although as you appear to be the victim of a hard of thinking previous owner it could...

Mocki wrote:the BoD sounds like a failing relay only louder .

thats exactly what it sounds like but it seems to have a volume control when you put electrical items on.

what exactly does the bOD sound like. the sound i have almost sounds like a relay that has started to fail?? Like the old fashioned buzzer people sometimes fitted in their homes instead of chimes for the doorbell (more commonly used in commercial reception areas to call someone to the desk). Quite ...