Club 80-90 Forums

If you've cleaned it all up then we apply some vaseline to the lump as you call it the bolt up but not tight trial and error once you've done you will always remember, then with the heel of your hand give it a good short sharp thump up and it will pop right in
mm

https://i.imgur.com/qstodOy.jpeg https://i.imgur.com/tFjXSfA.jpeg https://i.imgur.com/Ns9ErdY.jpeg https://i.imgur.com/Q04lkeJ.jpeg https://i.imgur.com/O3w77XV.jpeg https://i.imgur.com/sCrZ0mC.jpeg More picks than needed but we all like picks...... And the big bumper 89 dg will be up for grabs soon...

Yes garnet.....agate was something we were using today and totally unrelated...
Picks coming in a minute or 2
mm

We get our agate from my powder coaters ,it's a nice size compared to sand, doesn't have the toxisity and leaves a far nicer finish, it's reusable a few times as it doesn't break up like sands hence less dust cloud but as with any medium blasted with air it will bounce off the subject etc.i go see i...

hi the lower seam is beyond blasting as it will be rotten inside together with the bottom of the side panal, but thats not what you asked,
We use crushed agate but bear in mind it will only clean up what it can see so to speak,but it will gain you time
mm

icosahedron wrote: ↑17 May 2025, 13:01 I mounted blind-spot mirrors inside the cab that do the job. Out of the elements and easy to adjust.

I like those,what are they off, link please
mm

We use a lot of Purflex its a p/u base comes in black,white,grey,we bond ally panals to race cars with it and as other have pointed out clenliness is a must
mm

should have also said that the original inner sills have a few oval holes on the inner vertical faces..
mm

For the sill itself make a couple of holes to suit the grommets you have or will get.then when welded up waxoyl,dinitrol,whatever is you choice,..,as for the seal channel,blast some paint in with the rattle can nozzle real close and flood it,then as you doing this get a pipe cleaner and having previ...

sills both sides starts mon 11th 2005,(restoration and major repairs  end of page 2) the picks are gone (peebucket) it was ian hulleys van so give him a shout he may have copies but i will keep searching,
mm

hi done a few of these, not pleasant to do, i dont know if ive still got the detail picks of it as they were posted on here via photobucket and we know what went down with them ,i will have a look over the next few days, first got to think back over the dozens of vans ive done but I do recal it was ...

Purfleet is what we bond panels together on the off road cars we build.never known it fail comes in black,,white and cheaper than sika
mm

What colour cable is the start from the ign sw ?
mm

Ah never thought about the x relay killing the lights etc.nothing wrong with the starter as I remove the live feed to energise the starter and energise it with a 12v feed and it activates perfectly so I figure a fault with the wire from fuse box back so will get a meter onn and trace it.
Thanks all
mm

Thanks for that. Perfect methodical sense . Will check it through tomorrow.
Go have a look under electrical for my starter issues
And good speaking with you the other day
mm