Club 80-90 Forums

Thanks bigherb. All is clear now.

ash 1293 has mentioned "2 bolts fitted from outside". Explanation please.
Thanks. Mick.

Hi Rob and Steve. Thanks for the replies. I think if I can get the Tamperproof bolts out of the Steering column bracket then I can follow the "Wiki" instructions and work my way through the rest. Will try Chisel/Molegrips and if neither work perhaps drill and use an Easi-out. I will start ...

Hi. I need to replace the Heater Fan on my 1990 T25. Haynes says I need to remove the Instrument panel, Steering Column, Fascia. I'm OK with everything but the Steering Column.That involves Shear Bolts and Safety Couplings. Is it really necessary to remove the Column.
Cheers. Mick.

For anyone who experiences the same problem as me, the female connector on the flexible pipe supplied by JK or VWHeritage has a 12mm X 1mm thread. I bought a 12mm X 1mm male brake pipe connector (I found them easily on Ebay) and my local friendly garage fitted it on the end of the solid pipe that ru...

I need to change the flexible pipe between the Clutch Slave Cyl and the chassis. I thought I had bought the correct one from JK because they said it was the one that screwed directly into the Cyl. However, the Male connector that screws directly into the cyl is fine but, the Female connector on the ...

Hi Bradders89.
Sounds like the sort of person I am looking for. Contact details please.
Cheers.
Mick.

Hi. I need some work done on my T25 that will require Engine removal. I would appreciate recommendations of people in the Winchester, Fareham, Southampton triangle that are experienced in this sort of thing. I would prefer a small business run by someone who is happy to discuss the work required and...

Hi Mark.
I have contacted Timber Technicians and am pleased with their response and price so am happy to use them. I really appreciate the information you gave me.
Many Thanks.
Mick.

I would like a fixed Hitop on my VW Campervan. Does anybody know of companies that could do this for me? Has anybody done their own and could tell me where I could purchase one and give tips/directions on how to do it?
Cheers.
Mick.

Thanks for all the info. They may be expensive but some of them are really awkward to get at so I shall "bite the bullet". I'm just happy to find that they are actually available. I was amazed that "JK" don't do them.
Cheers.
Mick.

I am removing the engine from my 1990 T25 1.9 Petrol Watercooled. Whilst it is out I would like to take the opportunity to change all the "Rubber" Water hoses. However, dispite numerous internet searches I have been unable to locate any suppliers. Can anybody help?
Cheers.
Mick Pond.