Club 80-90 Forums

I've recently finished a 240 and 12v split charge retro fit to my van. The 240 stuff is easy, if you can wire a plug you can do the 240, it's all 3 wires just on different sockets/connectors. I ran my 240 through an RCD then off to various sockets, I had the 240 connector behind the flap (thanks to ...

I can find lots of posts on how to fix problems with temp gauge and the flashing light but what I can't find is where the needle should be during "normal" operation with the temp level correct. Mine sits at about 3/4 the way to the right...is this right or am I running hot? The temp gauge ...

Hi, my girlfriend and I are heading up to Aberdeen for the highland games in August, we're going to take our time getting up there, leaving on the tues/weds and probably back around the following friday. We're looking for decent campsites along the way to break up the journey and that have some good...

I has a similar problem with mine, when going to turn over it would be slow and seem to barely jump to life, I got a new battery, it still happened, it had me puzzled for a while, I took it to a vw garage and the chap there changed the starter bush, it fires first time now...unless I've left it for ...

Hi, I had a similar problem with mine, speedo worked ok, lighting as a little ropey (intermittent), red temp light not working, fuel and temp gauge not working either. Similar to yours the pcb was ropey at best. I found mine to be the main connector from the wiring loom to the pcb. Mine was totally ...