Club 80-90 Forums

Fridge sorted. Gas valve only works in the middle position. Grrrrr!
Markings long gone. I'm guessing thats the low setting.

I dont know if its like the Devon ones, they are under tension when the roof is at full height. What this means is you have to compress them to fit them. A hellish job :cry: . In the end I had to make a tool (jig) to hold them the correct length until I fitted them, then I pulled the roof down a tad...

Well, still no joy. Jet is cleaned properly, but still wont light. I’m beginning to wonder if the pressure regulator on the bottle is faulty resulting in less Psi (it is 30 years old). I’m guessing this would mean the gas passing through the jet would be insufficient to reach the sparker. The jet is...

:ok Had a dig through the old paperwork for the van and found the Devon wiring diagram. The red wire from the fuse box is the feed. The earth has vanished but easy to make something up. No idea what the earth cable attached to the fridge switch is for, cause the diagram only shows two terminals not 3!

Thanks, I suspect I may not have cleaned the jet properly. A tip given on the wiki sight says use a strand of copper wire. That should do cause brass is tougher than copper. Will disconnect the main pipe and I think there is a filter at the other end, and clean through as well. Not sure about the el...

The Electrolux 122 fridge in my T25 Devon is playing up. Its the gas and 12volt only version. Its always slow to light after being laid up over the winter, but no joy this time. It was sparking nicely so I pulled it out to check the gas was getting through. I hooked up the bottle directly and stripp...

This looks like the one.
http://www.protex.com/product/show/name/30-585" onclick="window.open(this.href);return false;
Just need to check the dimensions of an original.

Failing that, something from this site should work.
http://www.protex.com/catalog/index/parent/Light+Duty" onclick="window.open(this.href);return false;

My understanding is that the original latches are still available from Devon Conversions.

Where ever you source it from make sure it is the latest modern hose that can take ethanol.eg.
http://www.advancedfluidsolutions.co.uk ... e-95-c.asp" onclick="window.open(this.href);return false;
The older stuff deteriorates way too fast due to modern fuel.

I want to replace all the hoses to the petrol expansion tanks with the latest R9 hose that is resistant to modern fuels. Question is what size are the hose, ID. 5.6mm or 7.6mm or a mixture of both? http://www.advancedfluidsolutions.co.uk/saej30r10-r9-r7-fuel-injection-hose-95-c.asp" onclick=&qu...

nice one fella for the help, i should have took a note of what wires go where when i rebuilt the interior, i took a photo of the unit before i stripped her, theres 4 wires on mine, im assuming the red and black go to the fridge but not sure what the other 2 do, any ideas? sorry for jacking your thr...

Somewhere I have the original wiring diagram supplied with my Devon. Unfortunately I dont have a scanner. The set up is very simple. There was a red wire to the car battery and a black earth that supply the system. The white box contains the relay for the fridge. A wire goes from the coil to the fri...