Club 80-90 Forums

I've read all the threads on this ,I have a holdsworth and would like to fit a 3 point on the non wardrobe side Ive no upper mount I have the 2 lower as lap belts fitted First ? Bolt though at air vent does ,the plate with captive nut need to be welded in place or just bolted Next ? Where do you get...

No it was from a local specailist why do they bother to make such rubbish I rather pay £15 for a good than £8 then chuck it in the bin bad quality spares wind me right up

Just to update I took the clip out and remove cable from hub undone the clip that holds the cable pull old Cable though dash and being clever even put a draw cord in pull new cable though fitted to hub put e clip back done up clamp put a couple of zip ties in put spare wheel back just as I was think...

Brilliant thanks
Hayes said to jack it up and I was thinking why and never mention to remove the grill now if you could arrange for the rain to go away I would could get on with it lol
Cheers

Hi the bounce is now special 10-50 bouncing needle means 30 so time for a new cable two ? Do you need to jack it up because my drive a quite a slop (very handy for bleeding coolant system) and its full high so getting under its not a problem rather not do it in the road In the Hayes manual it says u...

This is now driving me metal the other day went out to the van and exspanstion tank was almost empty Puddle of coolant on the floor got that sinking feeling .anyhow had a look and discover the coolant sensor had cracked (feeled happier ) so got new sensor and cap . Ive since came to conclusion new c...

so I've just worked the one I brought was s##t and the old one was still good
Well you live and learn
Thanks for your help
Cheers
Frazer

Hi how do you check a darlek I've just change mine the old one was black with nice vw roundels and vag on it with two small values for a blue one from a vw specialist with only one big value is this right Ive read threads about sounds like a elephant or a quack if not it's knackered so where do you ...

Mine did this squeaky thing, I when brought a new blower and was getting ready to remove the dash ,tools at my side when my two sons said they wanted a bike ride and fish and chips I thought this sounded a better idea (let's face it I was going to break something think of all those plastic clips and...

I had look this morning but could not see a model number where is it
Thanks

Hi,well it will charge from a battery charger and hold it's charge (so think battery good) Every thing runs and works well But when you use the mains hook up all looks good on the zig unit ie orange light switch is on all fuse's good battery level green led lite but as soon as you unplug mains batte...

Brillant thanks that looks very good not like others I seem ,pick it up Saturday and then a days work fitting it , fingers crossed the air Box is not glued
Thanks

I know and understand what you are saying the van has only do 70 k so hope the blower got a lot of life left just a dry bearing it does start and spin for 7/8 seconds with a squeak before blowing fuse also my experience with the quality of some of the bits on offer from Jk heritage etc is shocking a...

Hi this may help you know the dimmer control blast some switch cleaner in to it roll it back and forward for a bit and hey presto our may be not you never know it work on my bay but I dint know I had a dimmer for three months

Brillant I will have a crack at this ? What spray did you use ? Is the air box fan housing the same for lhd/rhd ie drill as samba thread ? Mines 1.9 petrol auto holdsworth if I do bit the bullet and go for a replacement straight away ,the air box will I need to cut it open force apart the Hayes manu...