Club 80-90 Forums

Piston and valve coming together sort of noise. Quite mechanical. Although I really cannot believe it is as its going very well still. I have tried starting and stopping it again a number of times and nothing now. Baffled.

Not T25 related but. I have a seat Toledo (51 plate) with a 1.9 tdi engine fitted. Its been a proper pain in the a*** but for the past year its behaved itself. This evening however after parking it for a few mins, I restarted it and it knocked and didn't fire up. I tried again and all was well. I dr...

Do you want to use my workshop? Give me a call if you do.

A 1Y is just fine in my opinion.

Mer - think thats what its called. in in a blue bottle. I spent eveings using T-cut and it still looked awfull. I thought I'd just finish it with Mer and it came up a treat in seconds.

If really realy dirty use Muck-off first. You can buy it in mountian bike shops.

Are tdi injectors not clamped in.

Yes there is at the peddle end. The end of the cable is pinched by a bolt. You need to get underneath and feel around above the chassis leg.

Excellent

I take it that there are no noises coming from the wheels, scrubbing ticking or knocking? He jacked the front end up and spun the wheels to check they are free? No binding or dragging? He wobbled the wheels to check there was the tinniest amount of play? Is the grease just the excess being pushed ou...

The timing mark on my 1.6na flywheel is on the Clutch Pressure Plate not the flywheel. I turned the engine over and over searching for a mark until I found a photo on here (will search) It’s a blooming great big notch you cannot miss it once you know where to look. Your bottom pulley has not moved h...

any details on wiring that relay in? Would like to do the same on mine if possible.

I didnt use the baffled sump gasket. Dont forget the spigot bearing (I see you have one) you need to use the oil pimp pick up from your old engine unless that came with your new pump, but that will be obvious once you see it. I used my old 1.6 manifolds without modification. Mine goes very well inde...

Give me a call if you want to know anything. I amn only up the road in Gloucester if you need help.

07976 086 265

But your on the right path.

When I select first gear my van can sometimes jump out. I now tend to hold the gear stick forward as I let the clutch out so it jumps into gear rather than out of gear. The gear stick feels nice and positive with no real slop. Is it a lubrication issue or should I be looking to buy a new part? It’s ...

Fill in your details and then somebody locally might be able to help. I have a stack of them under my drivers seat. Take a look under your seat its a popular place to store spare belts etc. I am in Gloucester if you want o come and collect mine as I have upgraded to the newer style belts system.