Club 80-90 Forums

Thanks for suggestions folks.
From a plastic knife to 3D printing. I'm trying the knife first

Gone and snapped my speedo needle. Apart from gluing (it's brittle and in 3 parts now) what's my options guys ?

Thanks everyone. I need a Bentley manual I reckon. One side done, wish id bought the poly ones, its a load of hassle and not something i want to do again.

Just doing the radius rod bushes. One has metal plate and a 'seating spigot', one is Just all rubber. Which one goes to the wheel side and which to the front. Sitting here waiting to fit them and can't till someone tells me ! Manual diesnt mention it, cheers in advance, John

Sorted, Cheers guys,

I've a 1.9 dg petrol engine T 25. On the right Looking from the rear there are 2 flexible pipes off the exhaust that collect behind the light unit.
Ones perished, anyone help on who supplies them and what so they actually do ?
Cheers, John

Van seems fine now, although i'm underneath after every journey to keep an eye on it ! A big thankyou to all who helped.

Cheers Palmtree. I'll have a go as the magic metal has only partially stopped it.
If you happen to read this, can I just confirm there is no chance of knocking the cup into the gearbox ?

Thank for the advice

Hi all, yep when i got out there i saw the cover you meant. Mine is more to the front of the vehicle actually on the auto box. I got the circlip off but couldn't shift the plate. I was scared of doing irrepairable damage so i cleaned it off and put some metal filler in to get me slightly mobile whil...

Thank you 1664, thats really helpful. I'll have a look today. If it comes out easy i'll get it welded. It looks pretty furred up so if it doesn't come out i'll cross that bridge when i get to it. heading off to my garage with optimism !

My auto box is leaking. On the nearside above the drain / dipstick there is a 2-3 inch round 'thingy' (inspection hole?) held in place by a big circlip. Well thats where it's seeping from ! I've not took it off yet to investigate. Any advice welcome. Cheers in advance, John.

Hi Folks, I have a 1990 T25 1.9 Petrol with a fuelling / carb problem. I'm new to the High Wycombe area so can anyone recommend a garage around here who have the right gear and the knowledge to help me out. I know there's the yellow pages but thought ask the forum. Cheers, John.