Club 80-90 Forums

That was one option I discussed with my mate, retro fitting a spring. If you have a picture of what you did, that would be appreciated.


Sent from my iPhone using Tapatalk

Cheers. I suspect this or I think I seen there is a bush in there that could be worn or even stuck a little. Having looked at the Haynes manual, this seems a rather large job and not one I’m going to undertake until after the summer. I’ve got pretty good at lifting the brake pedal up with my toes be...

If you are any good with crimping wires to terminals,spade connectors etc, then you’ll be fine fitting it yourself. Loads of information online. Just need to find a wiring diagram and get the correct wire thickness. If it’s just LED lights and a charging point then definitely have a go yourself. Onl...

Fitted a Fiamma on our high top just removed 2 small sections of fibre glass to let the brackets sit correctly. The ARB brackets are a similar fit I believe. https://i.imgur.com/Vtp7UTE.jpg https://i.imgur.com/Q9pxc7M.jpg https://i.imgur.com/n1SsuHx.jpg Interesting. Cheers for sending those. Gives ...

jrt wrote:Can you post up a photo of your gutters so we can compare?
David.

Yeah I’ll get some tomorrow.


Sent from my iPhone using Tapatalk

Yeah it’s the hightop fitting in particular that I’m after. Would like to see one done before I bite the bullet. Mate of mine said it should be fine fitting to the hightop but I’m just not sure. Spoke to Jed and he doesn’t have any pics of one fitted to a hightop either. They do look like a great pi...

Has anyone had this issue? I’m not sure if it’s always been that way but when adjusting squeaky brakes today, my mate notice the pedal was about an inch short of returning to the top. When we lifted it, the brake pads slacked off a tiny amount. Could this be an issue with the pedal pivot point or ma...

Looking at ordering an ARB awning from CVC. Only thing that’s holding me back is whether it’s not quite as straight forward fitting one where there’s a hightop involved. All the videos show them being fitted to a pop top or tin top. Apparently gutters are narrower due to the high top. Look a great p...

Hi Jonnyb My boot now only closes on the first latch. Hoping over time the seal compresses a little. I've now fitted this seal but with a soft tubular joiner. Tailgate closes nicely on both latches. Suggest you experiment removing the hard joiner on yours. Front Doors. I've decided to get the T cli...

Hi Jonnyb Tailgate. My issue is with the joiner. The seal tube has to compress when you close the tailgate. I don't see how it will compress with that solid looking joiner, which is what has been supplied to me. Won’t know until you try. My boot now only closes on the first latch. Hoping over time ...

I ended up using second hand cab seals. New one was just too bulky!


Sent from my iPhone using Tapatalk

I’ve just done these 2 jobs. Stupidly bought cab door seals from JK and they are just too big. No chances the doors are closing. I removed the clevis pin from the check strap and having speakers fitted next week so no wire to worry about. The boot seal was a ball ache. I’ll get pictures that Brickw...

Parts in the red outline go inside the channel


Sent from my iPhone using Tapatalk

I’ve just done these 2 jobs. Stupidly bought cab door seals from JK and they are just too big. No chances the doors are closing. I removed the clevis pin from the check strap and having speakers fitted next week so no wire to worry about. The boot seal was a ball ache. I’ll get pictures that Brickwe...

A lad I know eventually found the time to give me a hand. It was a bit of a pain but managed to push the window/seal further in using fairy liquid. Then the bar was fitted and with a bit of gentle fettling, the cab glass was fitted.


Sent from my iPhone using Tapatalk