Search found 9 matches
- 12 Nov 2014, 21:37
- Forum: Mechanical
- Topic: Won´t start, -86 2.1L petrol T25
- Replies: 4
- Views: 1301
Re: Won´t start, -86 2.1L petrol T25
Great, thanks for for pointing me in the right direction. It has bee running a bit rough the first minute after i start it lately. As if all cylinders does'nt fire properly but it has settled quite quickly so i have not given it much thought. Im guessing that was an early symptom?
- 11 Nov 2014, 22:17
- Forum: Mechanical
- Topic: Won´t start, -86 2.1L petrol T25
- Replies: 4
- Views: 1301
Re: Won´t start, -86 2.1L petrol T25
I service the car my self, change oil each year. The spark plugs looks fine so have not changed them recently.
/marc
/marc
- 11 Nov 2014, 22:08
- Forum: Mechanical
- Topic: Won´t start, -86 2.1L petrol T25
- Replies: 4
- Views: 1301
Won´t start, -86 2.1L petrol T25
Hello all, After a month or so of reluctant starting the van won´t start at all. The starter runs fine and strong and I´ve measured the resistance of the starter coil and it it reads out ok. Disconnected a spark plug and it gives a nice bright spark. Loosened the bleed-bolt for the fuel (in the engi...
- 30 Apr 2013, 14:49
- Forum: Mechanical
- Topic: powerflex transmission mount??
- Replies: 12
- Views: 2439
Re: powerflex transmission mount??
@82camper Do you have a link to the fitting guide? Can´t find it!
- 19 Jun 2012, 16:10
- Forum: Mechanical
- Topic: High idling and jumpy on 1st,2nd and3rd gear
- Replies: 2
- Views: 580
Re: High idling and jumpy on 1st,2nd and3rd gear
Ah! Great, ill try that. Thought I'd change the gearbox oil anyhow so ill start with that.
//marc
//marc
- 18 Jun 2012, 19:43
- Forum: Mechanical
- Topic: High idling and jumpy on 1st,2nd and3rd gear
- Replies: 2
- Views: 580
High idling and jumpy on 1st,2nd and3rd gear
Hello all! We have an -85 with a 2.1l 112hp engine and have recently had problems with the car being very jumpy on low gears. This stops as soon as you disengage the clutch or shift into for example fourth or fifth gear. It´s hard to describe the problem but maybe some one has experienced the proble...
- 11 Apr 2012, 20:21
- Forum: Bodywork, Seats & Glass
- Topic: T25 Line Drawing/Diagram for vinyl wrap designing
- Replies: 6
- Views: 5714
Re: T25 Line Drawing/Diagram for vinyl wrap designing
Something like this? Have had one in vector-format but lost it..
//marc
//marc
- 07 Apr 2011, 11:12
- Forum: Bodywork, Seats & Glass
- Topic: Treat underbody with linseed oil?
- Replies: 7
- Views: 1505
Re: Treat underbody with linseed oil?
Thanks for your answers! I think ill give the linseed oil a go inside doors and on bare metal. Im also thinking of treating the exhaust system with thin layers of boiled linseed oil, as they get hot the protection should be something like the quenching process you described. Do think there's a risk ...
- 05 Apr 2011, 10:38
- Forum: Bodywork, Seats & Glass
- Topic: Treat underbody with linseed oil?
- Replies: 7
- Views: 1505
Treat underbody with linseed oil?
Greeting from sweden!
I've just bought a t3 caravelle from -86 in decent condition. Now to the question; I've heard that some use linseed oil to treat the inside of doors, underbody, etc against rust. Has anyone tried this?
Thanks for a great forum!
//marc
I've just bought a t3 caravelle from -86 in decent condition. Now to the question; I've heard that some use linseed oil to treat the inside of doors, underbody, etc against rust. Has anyone tried this?
Thanks for a great forum!
//marc