Club 80-90 Forums

Cheers guys. Used the info from a Bentley and tightened to 110nm. Reused bolts everything else was new as it's a new vega lump.

morning all, am i right in thinking that the flywheel bolts on a 1.9 DG should be torqued up to 60nm +90deg ?
fanks in advance.

i have an AEF engine which i fitted, i used the og wiring from the 1.6d and all is fine. allbeit i do live in tropical east kent

i am running a 1.9 d N/A and fitted a 5 speed box as i had the same thing, getting to 60 quick but when there screaming its breasticles off. i bought an AAP 5 speed box. it has made all the difference, now i can sit happily at 75-80mph and the engine is sweet. only noticeable thing is it takes a bit...

to be honest with you most garages wont let you take the vehicle away without getting paid. if they have done engine work then they should guarantee the work they have done, and supply the manufacturer of the parts guarantee, but this will be with limitations unless a complete engine rebuild has bee...

not sure which ones your on about but most of the electric ones ive seen are good for spraying fences and sheds and thats about it, inconsistant pressure, spitting and uncontrolable paint feed are a few things that spring to mind. i know some folk have had god results with certain things, like there...

check the wheel is not buckled and hitting the upper wish bone

drain the oil and remove the filter see if there is any swarf, normally when a big end goes the bearing turnes into wafer thin flakes that make it out of the con rod if caught early then shell replacement is all thats needed, if left too long then a crank grind will be needed. difficult to diagnose ...

Just filled my 5sp box with diesel bell housing on from completely empty. I filled it till it dribbled out then left it for 20 mins to allow the oil to seep through the bearings into the diff then got another half a litre in. In total 4.5 liters filled it up.

deffo gearbox out.

cool found it, it is an AAP.
thanks all

Great. Thanks for that I'll have a look tomorrow.

chees guys, i found this but im guessing its not this, i was looking for the letters AAP.

Hi. Just bought a gearbox it supposed to be an AAP but I can't find any codes. Does anyone know what and where if any I should be looking for.
Cheers
Kev.

very