Club 80-90 Forums

We had tint thermal blinds and curtains, no ones seeing in . And all lining is supposed to face outwards.

I recon its a green white with red stripes ones that stays where you put it. tter than my fast errect awning after the gales the other day,

I had 2 x 15" subs in my first bus.. got rid when my first son was born .the bus I sold recently had a 12" I custom built into the r and r bed and ported. It was amp-le

There is a stack of 15" tidy merc wheels in a breakers by me, 15-20 squid. There the nice ones with elongated holes not the round if you get stuck .I'm trying to source a 16" et41 7 1/2j.

You have been busy on your BUS always worth the effort your going to rather than cover up fill and forget and let your BUS flap around.

The older jk cataloges used to illustrate the mounting points, I had the nut/plates made and welded buy a pro on our first van. Stripped out van prepped area drove to him disconected battery, 25 squid later, an exellent job and welded all the way around the plates too. Try and find a steel fabricati...

Sell them to a t5 owner.

Alternator? But why its still going I can't answer

It's a lid off a spray paint can

If theres enough meat on the wheels couldnt you have the bold holes machined to take the said bolts? Just an idea, nice looking wheels .

Depends on the depth of your caps, i machined my caps 5mm and speedo clips and cable were fine. There are few alternatives been nicely done by people on 8090 i saw some good retro home made dust caps made from rattle can lids,cant remem ber who it was im afraid.

14mm

Are the bump stops cut down?

My old bus started life with no mounts. I had mine seam welded and made my own plates with nuts welded all the way round them to the plate.i was taking no chances my kids sit at the back

Scary I know it happened to me with my old bus going round a roundabout with my son in the back. I found it was the alloy cast catch on the pillar was worm and ajusted all allen bolts to line up. Then took the cover off the back quarter where the runners are and greased and check bearings and alinem...