Club 80-90 Forums

I've been in contact with Gasure. Unfortunately, this is not something they can deal with. It seems this needs to be done by a specialist who can remove and dispose of the tank, in situ. I've phoned a few places but they all seem to only deal with install and maintenance. UKLPG seems to have few reg...

Ok, Thanks for your reply LeeME3 but this has gone to worse missing out bad! I topped up the LPG today after my original post, still no supply to the cooker. Went to check the valve on the undercarriage, had a little feel around regulator and started to hear a hissing sound. Then a smell of gas and ...

Hello, Our 85 Westy leisure system has decided to stop supplying gas to the cooker and fridge. Does anyone know why this might happen all of a sudden? The engine runs on LPG too, the gas supply to it works fine. The leisure tank fills up whilst filling main tank and the main tank is full but there s...

Hi, Checked ball & socket - intact, although rubber shroud has gone. Just done a scrape for gear box code found two numbers 091 301 103 D on side of transmission housing and 091 301 107 C on underside of clutch housing. Does anyone know if these numbers will assist with sourcing a correct recon ...

So re-build vs recon....any recommendations. any ideas of costs I could expect?

R

Hi, I've had similar problem. Got stuck in 3rd (had been sticky prior), managed to free wheel and get moving in 3rd, then popped out to neutral but could only use 1st & 2nd, drove back slowly toward home (10miles), a mile away from home and it seized up completely. I know nothing about motors. S...

one evening over BH weekend nearly had a smash up as someone pulled out right infront of me... lucky the vans slow!!!!

my driver side indicator comes on solid (note LHD) whilst head lights are on, indicators still flash though...checked fuses which seem fine..

relay???

Took the swivel system apart, all the little nylon type spacers are in place and don't seem overly worn. Applied grease, tried losening the nylon bolts a 1/4 turn but still quite stiff when rotating. It looks like the bottom spacers might be the problem as the swivel plate sits on the spacers and th...

I'm doing this as we speak.......

Can't get heater control panel off......what's the knack? I've the lever handle off. The facia is proving the bug, seems tight top right and bottom left. I imagine it a little push clip like other facias!!

Thanks

Hopefully I'll get it apart today and check. Drawings ........ I like. You haven't got one of t25 westfalia to scale front & side views do you???? ?

You'll need a panel trim to let the belt throught the back panel! £2.40 or so from brickworks (order more stuff as the stings on the delivery cost)

Yeah! I'd did think having a box like this and traveling through parts of eastern europe, I may look like a romani looking to take revenge.......

Thanks, I'll give this a go!

Don't know if you're still interested but I found these Peli boxes. The gowesty one is basically a gun box, which peli manufacture similar. The link shows the box that I thought was just right , offering a little more depth than a gun box. It would be fairly straight forward to get a folded steel ba...

85 vanagon, with original swivel base to front seats. When I first got the van I did as much of an overhall, clean up and grease up as I could, but struggled to improve the swivel action on the seats. I took the mechanisim apart, tried grease (no good), the best improvement came from silicone spray ...