Club 80-90 Forums

Just ben sorting  the VW Syncro BBB Charger unit as it had packed in. Its been in since 1986 when Westfalia  made the conversion. 1-First thing I did was to check the breaker so hooked up to Mains 2- trip worked pushing the button it threw out and locked back in to provide mains to van 3- tested ma...

Have been running our rebuilt 2.1  engine for some time with over 2000 KM on the clock so its well run in, so this summer took it to the Pyrenees and had a great time except the weather was extremely hot for Sep/Oct but cooled off now. Generally the temp guage needle rests with the bottom edge of th...

There’s not really much wriggle room, the screw holes have small reinforced areas for the each screw hole Do you know how wide the reinforced areas are for each screw hole in the Westfalia top for the pop up roof and photos or cutaway diags would be good. I take it that you have done this before fo...

We are taking our 1986 Syncro westfalia in to have a new brickworks  pop top fitted by a specialist but he already suggested that some of the screws for the top skirt and some at the bottom edge are so corroded he would prefer to drill fresh holes for new screws so is there a ring or halo of embedde...

Tried my small torque wrench on one of the  14mm tappet lock nuts on my old engine and its registering with its click at least 20 lbft but dont want to overtighten it or under tighten it even though its not used currently or even know if the nut was torqued correctly in the first place as I dont kno...

anyone got a fix for our propex 2000 heater as its not sparking to ignite the lpg. Propex are still living in 2022 and say they are closed for Christmast etc but dont respond to emails or phone calls except on a recorded message so have they ceased trading as I need some techinical advice/spares . A...

Hi
What manual Did you use to rebuild your DJ engine with eg Haynes or Bently as I woud like something more specific if possible showing lots of data and picture?
Your stipdown thogh is pretty detailed
Kevin

So you tried to fit one of Gunzl's and it didn't fit ? Did they reuse the original seal or a replacement and was it genuine or aftermarket ? SyncroPatrick investigated a repair solution, with multiple companies, I don't know how he got on though Hi Aiden hope all is well Yes I think it was a Gunzel...

When restoring our T25 Joker  Syncro T25  1986 we replaced our cracked thermo rear window with a glass replacement. The crack is on the inner skin with a hole in it so I have tried to find someone that can mend it or an accurate OEM  type replacement but the only replacement available (originally fr...

We have just got hold of one of the rear plastic double skinned windows that were used on the Joker versions of the T25. Ours is a 1986 T25 Syncro Joker and the rear window on our VW has alas got a crack on the inside skin. Now the new unit looks great in every way (but we haven't fitted it yet) how...

We have been looking at upgrading the extra security for our T25 Syncro Van and have been looking at locks that you can self install. Ford Transit have a good system with metal plates for the sliding door that mate up and can be locked from the outside with a padlock as the locking systems available...

The latest reply about a valuation from my insurers after a delay of about a week. concerning our restored 1986 VW Westfalia Joker 2.1 LHD with Diff locks back and front £15,000 spent in the last 2 years on welding and a new paint job, new windscreen, internal components eg sink parts batteries Inst...

Aidens suggestion of the engine number seems about right as we know it was rebuilt in 1999. Regarding insurance I went to classic line and was quoted £300-£400 for a year insurance agreed value £25,000 restricted to 5000 miles which is pretty useless for travel. Also a valuation by Christian Gauter ...

Sadly my insurers Carol Nash like a lot of companies pay so little to their staff that they employ it seems school leavers who have failed their o levels and don't now an engine number from a vin number that the guy had to keep going to a manager when I queried things instead of experienced staff th...

I wanted the engine number on our LHD 1986 Syncro Joker 2.1 DJ for insurance purposes. Now normally its a 6 figure number starting in our case with DJ as its this engine and its usually located on the base casting of the oil cooling tower eg DJ 035648. However on ours it has only a VW logo stamp wit...