Club 80-90 Forums

Van-X for me
https://van-x.co.uk/vw-t3-side-window-p ... n-kit.html" onclick="window.open(this.href);return false;

and they do a very tidy rear door one in a similar style

What CovKid said, but be wary some replacement locks are a different key profile so you can't just re tumble the locks as key style is different

Yer need some petrol in there....

Did you get sorted with this mate?

Dan

Hehe, sorry, couldn't resist..
"Whats your name Kev?"

So they must be running with the HV circuit = not ideal as that is were most of the wasted amps go. As it is really simple to remove the ballast / start up circuit gubbins and simply stick the strip on the back plate, and connect the 2 wires up, that would be far preferable both in terms of power s...

Is that one of them mw/lw roberts? You aint going to get many stations on that one no matter what you do methinks. But a nice bit of retro kit.

+or - 5mph, I would live with. If I take the cable clip off mine it bounces about 30 to 40 mph, thats the range, no idea if theres any +, but there is definitely a minus

I forced a piece of cardboard under it, and now the cable cant move at all, no speedo bounce!! Glad you fixed it properly, without bodging it or anything :rofl You should do it properly, and use a piece of plastic ice cream tub. No point in a half assed repair, mate :wink: A good bodge is always be...

Tell you what though, its weird not seeing it bounce up and down, I find meself altering speed just to see if its stuck

After changing the cable, changing the hub cap, and still having the dreaded speedo bounce, I was resigned to accepting when it bounces between 30 to 50 MPH its true speed is somewhere inbetween. I've been repairing the instrument binacle over the past few weeks, fibreglass, araldite, etc, as the sp...

There's a piccie on the 80-90 Facebook page of a barrel that's been lubricated with "wet" whatever.

http://www.greenbrook.co.uk/products.php?cat=200

I get mine from Denmans, same as these, about £17 per pair, they look good to me

I use graphite powder, but only after I've cleaned all the crap out, a good soak in white spirit usually does it. But note you will probably have a fair amount of wear in the locks after all this time, so even with good lube, you can still get problems. I can cut you a new key if you get the lock co...

I love k seal, but it doent half bollo**x the dalek cap!