Club 80-90 Forums

Thanks, I was thinking of taking the runners of my old seats and putting them on the new ones. Sounds good. Cheers for the reply.

Hello, was just wondering if anyone had tried fitting or has fitted bmw seats in their van? I might be able to get my hands on some and wanted to know if its possible and easy to do? Thanks

You no what they mean. It aint that hard to figure out! 1 = one, r = are .... Its just a bit quicker that's all Of course i know what it means, I have kids of my own, I just thought this was a forum for grown ups that's all. You must be a busy boy if you need to save a few nano seconds, my advice w...

You no what they mean. It aint that hard to figure out! 1 = one, r = are .... Its just a bit quicker that's all

Just a quick update. Thanks to everyone for the help. I got myself a breaker bar, don't no y I didn't have 1 b 4, they r a great bit of kit! Brought the other bits spray etc. I got the wheel nut off and the rear is all finished. Shamed to say only managed 1 of the front! I was looking after my 2 1\2...

R0B wrote:Something like these should get the wheelnut off.http://www.toolbank.com/p/IRW10504635 Or you could try knocking a smaller size socket onto it first..

Hi got those sockets did the job without any hassle. Thanks

I hope I'm trying to do it right! I thought u can undo the bottom shock bolt then the wishbone bolt and struggle for a bit and hey presto? Sound ok?

Cheers for the tip, I saw it a while back in camper & bus mag. Undo a couple of bolts, straight swap of springs. Said it takes 3 hours. How hard could it b!!!

riffboy wrote:A couple of weeks pumping iron in the gym, then go for it lol.

Ill have my weetabix in the morning!

thanks for all the advice. getting all tools, spray etc together and giving it another go at the weekend! one way or another they r coming off and my shiney new springs r going on. it better b worth it!! will let u no how it goes.

the first corner went fine, i new it was too good to b true!!

cheers. yer ive been using wd40. thanks for the advice

lovely cheers mate. any ideas of how to get the wishbone bolt undone?

Hi, i wanted to lower my van by changing the springs, heard it was easy so wanted to do it myself. the first rear corner went fine took off lower bolt of the shock and swaped the spring no problem. went to do the other side and didnt even get the wheel off! the last wheelnut i manged to round off! a...

hi, just had my first time camping out in my t25. It all went fine apart from had to start off in 2nd gear most of the time. It goes into 1st but when i pull away it just pops out? So i have a few q's would it b the gear linkage, is it easy to do for a diyer with a few basic tools and how much would...