Club 80-90 Forums

Yes your right Alex, diesel pump is in the way. Sorry.

They are easy to change pal. get a 8mm combi spanner and 10mm 3/8 drive deep socket and extension and ratchet. 8mm spanner and telescopic magnet is handy. Those 8mm nuts on end of glowplugs are a s*d for dropping on engine. remove the copper strip once all the nuts are removed. Then get the socket o...

Reg been trying to contact you for two weeks. To ask you if you can look at a AAZ pump for me please?

It was the pressure plate that broke. Not worn clutch plate for your information. Another point East Anglia is flat, unlike the City of severn hills near where I am.

Oldiebut goodie wrote:Drives with the left foot on the clutch pedal maybe?

Thanks but neither have answered my question.

Hi
Can anyone advise me on how I upgrade from a JX clutch to a stronger clutch as this one only lasted 1700 miles? what are my options? Can I fit a 228mm clutch onto jx flywheel? Of a petrol T25? Or can I fit a passat clutch? If so which one?

Thanks

Nothing wrong with jx flywheel and clutch on aaz. I agree Loydy.

used washing up liquid and pushed it on with my foot. lol uote="VWGeoff"]Hi I think its that copper grease that made it slip off the 2nd time. So Ive cleaned the bush wiped the grease off. And I'll get someone to fit it onto the antirollbar in morning. Anti roll bar mounts are fine they ar...

Hi I think its that copper grease that made it slip off the 2nd time. So Ive cleaned the bush wiped the grease off. And I'll get someone to fit it onto the antirollbar in morning. Anti roll bar mounts are fine they are powerflex allready. Been on 5 years and still like new. I refitted the droplink s...

Sorry to have to ask. I have a problem with early type droplink. I found on wednesday that theeye of the droplink had came off the rubber bush that`s been on it for 4 years. So I ordered after measuring the antiroll bar with a vernier, it measured up as 21mm. powerflex with a bushes from Simon. And ...

Hi I have a break in the circuit for clocks that lights the bulbs to speedo and fuel gauge. So I thought I`d wire in 2 LEDs as replacement, as they are brighter. I want them to light up when parking lights or dipped are on. I have a 1.6cs 1983 early single plug type circuit. Has anyone got any ideas...

Hmm. I see what you mean now. It could be it . But mines a thin black pipe that goes inside that rubber clipon circular thing. Sorry.

As I said above it connects to the oneway valve on fuel line above fusebox on left in engine bay. Pic here but for some unknown reason it wont add it. Saying invalid file. I can email if you want. Just finishing my 2nd aaz conversion.

your missing a pipe coming off that rubber circular thing in middle of picture. If I remember right it connects to the fuel pipe. look in engine bay. if its always been diesel theres two pipes above fuse box on left. ones a vacuum pipe for servo. connect it to the other pipe. It should have plastic ...

Clutch release bearing in bell housing. Just done mine. Would it change gear when not running? If so there's your answer.