Club 80-90 Forums

Yes, both of the spring mounts are in good condition and are located properly, there is no noise going over speed bumps only when the van moves from side to side. The springs and shocks are relatively new. Just seems strange for the noise to develop after replacing the joints.

Just replaced all 4 cv joints and now i'm getting a creaking noise from the rear of the van on both sides, Ive packed the rubber boots full of grease made sure all the bolts are tight. Could it be the joints? Got them from just kampers and they said they were oe.

Could also be a broken/damaged spring but more commonly, the spring plate on which the rear spring sits being corroded - often part way through the centre spring locater bit (small stubby bit of metal almost hidden by very bottom coils of the spring. Have a real good look whith vehicle jacked up an...

dear god i hope not, from what Ive read on here it sounds like a bundle of laughs
Will check them over tomorrow.

Evening, The van has started to make a creaking noise from the rear when going over bumps. It was fine before i changed the engine over to a gti, i also replaced the CV joints and gearbox rubber mount. I've tightened all the bolts tried rocking the engine, moving various parts to try and replicate t...

My fuel pump has recently stopped working (mk2 gti) there's power at the push on socket that attaches to the pump it just doesn't do anything. The van was running spot on before it seems strange that it would just stop overnight.

I think its 7mm same as the brakes

.

.

when i did mine it was about 75-85cm that was including the pallet though

Hi

Just wondering if anyone would be able a make a agg wiring loom and how much? Have the full loom from the car that i can send out.

Thanks

Thanks for the advice, sounds like it should be straight forward

Just wondering how easy is it to remove without a engine crane? I have 2 trolley jack's and a pallet. Also can you remove the gearbox and engine as one?

Thanks

Replaced the ignition switch and all seems well.

Thanks

The battery is reading 12.4v, fuses are all spot on, tried turning the ignition on still the same reading.