Club 80-90 Forums

If there marking then your getting then too hot fella,s, slowly does it left to right. or up n down.

use a pencil grit blaster on low pressure, and wide fan at nozzle, worx a treat.

Why anyone feels the need to wragg sump bults so tight it either strips the thread or is nigh on impossible to undo I can never fathom.. that bolt isnt holding the engine in.. :wink: a new copper washer and a 1 handed nip up with a 13mm combination spanner is all thats needed... :ok :rofl dont know...

where abouts are you mate?

you will struggle with that pulley,, used lots of loctite and a home made tool my friend had made, didnt want it working loose now. have fun. there a lot of money those 3 ring pulleys,leave it on. The head was slightly pitted, so i gave it a good coating , and a bit xtra for good luck ,

yes its really weird,,,,, a couple of things maybe its from my old tank,,,which i was changed in 2006 for a new one,and was just hanging around inside,, or another thing it maybe but not sure, is that the 2.1 engine you had off me,, when i reasembled it, i used blue hylomar everywhere, on the thrott...

Ok , van started a backfire, took his fuel pump off and found it kind of full of black jelly silicon type goo. Now doing a bit of search on the net, kind of takes me to usa site, but found that ethanol is being added to petrol to some degree without us knowing, maybe up to 10% as instructed by the g...

which engine mount/cradle do you have? any idea`s who did your conversion? any pics of your exhisting zorst may give me a clue ,, just completed a EJ25

time to fit, well pleased with allignment and quality of fit.

Can you not remove the wiring harness and start a fresh with a rjes loom? Where abouts are you in the UK?

No Dan, never had any issues with the plates, ive got a rear magnetic one i just slap on when i m gona go on the motorways, the front never goes out with out the bra on ,so its kind of less noticeable and overlapped a bit. The extensions are from axel winkler and Helmut in Germany. Now one niggling ...

yes dan sure is,, you going to bus types? coat of primer today.

oh yes,, still got to take out on the road yet ,that will be happening in next 10 days . still just adjusting little things,, such as bleeding up the coolant. today ive removed the vw tranny cooler,,fitted the mocal and got the pipes made,,, just waiting for the m12 adapter which should be tomorrow,...

Decided to buy this bumper extension to hide some of the low hanging items of the scooby engine. should give it a less cluttered and cleaner look

Na , EJ25 i have,,, thanx anyway -just tonight sorted it, needed a tweek on calibration screw, duno why it was reading out on my guage,, was aparently set up correctly on rjes system,, now reads 1100 on start up and drops to 600 rpm , which is correct,, gona just test at RJES when i get chance. i wo...