Club 80-90 Forums

Spare gauge is worse than the one fitted led does not even run diagnostics

Looks like I will be keeping an eye on ebay for another gauge.

^^^ WHS But if the problem is still there with the 42/43 relay removed and the needle is reading correctly then that pretty much points to the gauge itself being the culprit (with the only other possibility being that there is a bad earth to the gauge and that is causing weird behaviour), Try turni...

Sorry yes its 42 (was trying to do it from memory rather than checking, makes no difference if in or out

Hi All Got a odd problem and I am stumped. When I start the engine from cold everything works correctly no warning lights temp gauge reading correct and all will be fine until I turn her off. When I restart her again everything is working correctly (inc temp gauge) apart from now the warning led is ...

Hi, mine does the same when tank runs dry, or I get a air lock in the pipe. In the absence of any way to prime the pump, I find disconnecting the watertank pipe from the pump and sucking to clear the air lock normally does the trick, however you have to be quick reconnecting the pipe if you do not w...

Was thinking the same thing.

Mine has a compression fit t piece in the copper pipe and the feed to the fridge comes from there.
Mine is like this but in brass
http://item.mobileweb.ebay.co.uk/viewit ... 0646870847" onclick="window.open(this.href);return false;

Many thanks for all the advise, I have had a good crawl under the engine and can not find any sign of the high pressure switch or any wires leading to that area so I would say I only have the single pressure switch. while I have the unit out I have just checked the bulbs as they also are not working...

sorry really stupid question, where is the 2nd oil pressure switch??

pin 4 is vacant on the loom but not the current clocks
fuses are the blade type and yes i do have module 43 fited

So from what you are saying I need the later unit, is that the one with the clock??

here is what I have

right Chassis number is wv2zzz25zgh053318 first reg feb 86

might have known it would be on the change over

Fantastic , that will be my litle job tomorrow

Thanks again
G

That was my feeling to, I just want to try and get the corect one as they all seem to be wired differently.

Many thanks for the quick replys , fuel gauge sort or works but does not show a full tank only ever gets to 50%, will try and post a pic tomorrow.
Did not want to hack the loom about to much ( its bad enough as it is) also they have cut a section of the pcb out on behind the gauges

Sorry petrol 2l watercooled