Club 80-90 Forums

They only have to work on dipped beam.
Land rovers are wired this way all the other cars I looked at work on both dipped and main beam. Only found this out when I finally got the wiring diagrams out, then went on line to DVLA where they confirmed it

Sorry Rob never done one and if you were closer i'd come up and give you a hand as I got an auto and would like the experience, It doesn't look to bad to do according to the book except an extra pair of hands wouldn't go amiss to seperate the box and keep the torque converter in place as well as enc...

jamesc76 wrote:Well if it is suposed to be there to late mines gone!!! I tryed to blow through it and couldnt so how gas is suposed to get through it god knows!!!

did you turn the knobs on

Just be warned that changing the atf on a transmission which has never had it changed before may cause your trans to fail. New ATF has lots of detergents and when they work there way behind old hardened seals, clutches and brakes they sometimes clean away all the gunk -which was keeping everything ...

Hi Rich, can you tell me how the paint is split colour wise inside? As I've put similar colours on mine 5 years ago but never striped it down, so I got over spray within the door shuts (you only see it when you open the door :) ) Next year she deserves another coat and want to strip her this time re...

instead of using back to black to maintain after you've sprayed them, try black dubbing shoe polish. Rub it in using an old tooth brush then buff it up with a cloth it does take a few hours to harden but it lasts and expels water

jed the spread wrote:we tourd scotland last december/january with our two year old son and to be honest was one of the best holidays we have had. for some insparation look here www.freeweds.com/ababyonboard/

jed

Thanks for the link to your web pages (only done 2008 so far) makes me want to go north this winter

Hi, is the hook-up connector normally blue the same size as the 110v yellow it's just that Jewsons have yellow ones in at 2.20 each.

on the new filter, wipe the rubber seal with a little oil put a small amount into the filter before you fit it and only do it up by hand, tight, but by hand. and if your are working on a slope face it up the slope so all the the oil drains It should be a 13mm bolt with a copper washer just make sure...

Hi Simon, I've look at your website Re: springs do you only do the lowering ones -30 down or do you sell standard springs?

I have some Wynns Radiator Stop Leak sealant (recommended on the wiki). :shock: I've just read that article on the Wiki where they recommend Wynns. Is it the cooling system stop leak in the round metal tin or the blue plastic rad and cooling system stop leak? both products are by Wynns or are they ...

Sorry to hi-jack the thread but

do Caravelles use -30mm springs as standard?

Well he popped in for 5 minutes (I thought he was helping me out today!) he's buggered off to Weymouth.

the stud pattern and spacing look the same but....

hopefully someone on here will confirm for you

My sons bring his T4 round today I'll have look. But there's probably someone on here that will tell you straight away

Good news all round Jpee