Search found 18 matches
- 25 Mar 2011, 00:12
- Forum: Bodywork, Seats & Glass
- Topic: Welders in Southampton Area
- Replies: 3
- Views: 726
Re: Welders in Southampton Area
I did respond with a name. It was deleted by greater powers that be for whatever reason.
- 22 Mar 2011, 21:34
- Forum: Campers
- Topic: Welders in southampton area
- Replies: 2
- Views: 795
- 22 Mar 2011, 21:30
- Forum: Bodywork, Seats & Glass
- Topic: Fitting a window to a sliding door
- Replies: 13
- Views: 1687
Re: Fitting a window to a sliding door
I had a friend who worked for Autoglass do both my windows in a van for £50. He said aboslutely to not use a jigsaw. He marked out the correct size aperture, knocked a hole near the edge with a cold chisel, and went at it with tin snips.
Good luck!
Good luck!
- 21 Mar 2011, 21:31
- Forum: Any Other Matters
- Topic: T25 metal dashboard
- Replies: 28
- Views: 29380
Re: T25 metal dashboard
We had ours powder coated white about 4 years ago. It is as glossy as the O/Ps dash and is still as fresh today as when it was done. Dash cost £25 to have done which included all blasting/coating removal. Have yet to have any issues with glare. as someone previously said, it lightens up an otherwise...
- 07 May 2007, 18:56
- Forum: Electrical & Instrumentation
- Topic: 2 leisure batteries
- Replies: 15
- Views: 1861
- 06 May 2007, 18:31
- Forum: Electrical & Instrumentation
- Topic: 2 leisure batteries
- Replies: 15
- Views: 1861
- 19 Nov 2006, 17:01
- Forum: Technical Questions and Answers (archived from live forum)
- Topic: WHERES UR EBER FITTED
- Replies: 6
- Views: 1052
- 11 Aug 2006, 23:00
- Forum: Technical Questions and Answers (archived from live forum)
- Topic: 3/4 width Rock and Roll beds..Dimensions required pleasssse!
- Replies: 4
- Views: 776
3/4 width Rock and Roll beds..Dimensions required pleasssse!
Hi all, i have purchased a spangly set of R and R hinges from JK.I am looking to start cutting the wood pretty soon.
I am looking for as many people as possible to post the width of the seat panel and also the back rest if it differs.
Any feed back will be massively appreciated!!
Many thanks!
I am looking for as many people as possible to post the width of the seat panel and also the back rest if it differs.
Any feed back will be massively appreciated!!
Many thanks!
- 01 Aug 2006, 20:44
- Forum: Mechanical
- Topic: Anti Roll bar Links(cranked)
- Replies: 4
- Views: 951
Anti Roll bar Links(cranked)
Ok people, what's the bottom line on these buggers?Have just changed(or tried to) the bushes on the arb and the link bar bushes.I mange to snap both cranked link bars.I know these seem to be scarce.Are they available anywhere?Is there an alternative?What do they drive like with no ARB and -60mm spri...
- 24 Jul 2006, 15:28
- Forum: Technical Questions and Answers (archived from live forum)
- Topic: 3/4 width Rock and Roll bed dimensions
- Replies: 14
- Views: 2833
- 23 Jul 2006, 23:26
- Forum: Technical Questions and Answers (archived from live forum)
- Topic: 3/4 width Rock and Roll bed dimensions
- Replies: 14
- Views: 2833
Plans
Mike, i have tried to POM you and keep getting an un-authorised message!
try me on tomdotrobertson2atvirgindotnet
Many thanks for your help!!
try me on tomdotrobertson2atvirgindotnet
Many thanks for your help!!
- 23 Jul 2006, 12:04
- Forum: Technical Questions and Answers (archived from live forum)
- Topic: 3/4 width Rock and Roll bed dimensions
- Replies: 14
- Views: 2833
3/4 width Rock and Roll bed dimensions
Hi all,
Does anybody have the time to provide me with the dimensions of a 3/4 width rock and roll bed.I have the hinges from JK and am looking to cut the panels to fit,but didn't want to buy their kit that uses MDF.
If anyone can help that'd be superb!
Thanks in advance
Does anybody have the time to provide me with the dimensions of a 3/4 width rock and roll bed.I have the hinges from JK and am looking to cut the panels to fit,but didn't want to buy their kit that uses MDF.
If anyone can help that'd be superb!
Thanks in advance
- 25 Jun 2006, 19:50
- Forum: Technical Questions and Answers (archived from live forum)
- Topic: JK bare MDF interior panels
- Replies: 3
- Views: 883
JK bare MDF interior panels
Anyone have any feedback o nthese items?I am looking to sort out mine, but if the fit like a shirt on a wheelbarrow I may have to have a re-think.
Also, anyone got a set for sale?
Also, anyone got a set for sale?
- 24 Jun 2006, 22:44
- Forum: Mechanical
- Topic: Fuel Filter Location
- Replies: 3
- Views: 858
Fuel Filter
Thanks people
- 24 Jun 2006, 18:31
- Forum: Mechanical
- Topic: Fuel Filter Location
- Replies: 3
- Views: 858
Fuel Filter Location
Ok, i am being a lazy twit, but where is the fuel filter on my 1983 Watercooled van?Is there just the one or do I have a catch you out pre filter o nthe inlet to the carb or anything daft like that?
Thanks in advance!
Thanks in advance!