Club 80-90 Forums

Thanks people you really are a wealth of knowledge. so ive changed the coolant sensor and temperature sensor independently and still getting the flashing red light. It does go out on headlights but comes back on on main beam. I will check the 43 module as advised and clean it up. I will let you know...

Thanks for the replies. Its a westy 1.9 DF So ive ordered a sensor that goes into the Header tank and another single wire sensor that screws into the engine. Both only a few quid so i will replace them both and get back on here to let people know. The thing thats getting me is it goes out when the h...

My Temperature gauge light is permanently on and only goes off when the Headlights are switched on . I guess its a wiring problem anyone point me in the first point of call.
Thanks. 

hi mate its an 83 DF 1900 engine.
Thanks

My wiring loom has burnt out behind the dash board, The mechanic is having trouble sourcing one. Any ideas and as its a left hand drive would it be different to a RHD one. Many thanks,

Hi ya Kev its a B2l and ive tried a 15 and a 25 amp fuse and they both blow immediately you switch to heat mode. It done this a few months ago then righted itself and is now blowing again. Baffled.

You've got the old type watertank. The sensor are on the side 3 sensors for 3 indications on your level indicator.

My eber fuse is blowing when I switch it to hot. Its ok on the cool setting any thoughts gratefully accepted.

Cheers Martin ends up being the 12v pump was knackered.

All the best

GARY

Anybody know where the tap fuse is on a 83 westy

Cheers

Gary

Thanks ghost123uk so I could just tee off from one of the inside pipes and there wouldn't be a pressure problem running propex hob and fridge at the same time.
Cheers
Gary

Just a thought could, you run a propex by teeing off the underslung that runs the hob and fridge or is that liquid gas as well.
Cheers
Gary

Thanks Adrian there fluorescent like the original ones. Just to clarify original wiring going into the new lights is red and blue so connecting red to red and blue to black should do the trick is that right.

Cheers
GARY

Just got new interior lights for my westy. The new lights have 2 wires red and black the original has red and blue does the blue connect to the black or is it a neutral. If it is where does it connect to. Sorry for my ignorance
Cheers
GARY