Club 80-90 Forums

I certainly will cheers Mark

i think i might buy one and give it a go cheers mark

Does anyone know if you can replace the exsisting relay for a number 36 vw relay to give you a buzzer for lights left on? after reading the wiki I can not find the answer to this question thank you for looking mark

Our problems are all the same as metalmick8y to the letter except we were stuck at the slip road off of a motorway. Acting on this information I discovered that the gear guides under the gear stick in the box thingy are well worn (only half there on one) and all the bushes are really worn also and e...

hi our 5 sreed gearbox for 1.9 seems to be stuck in 5th gear does anyone know if this is common and can it be fixed cheers for looking Mark

hay Keith you should have left it alone, your tinkering will get you into trouble you know. You can call Marty I will text you his number Cheers Mark

Hi a mate of mine has been having problems with his brakes on his T25 :cry: I belive he changed the rear drums and shoes and after this his pedal goes staight to the floor but not all the time. He took it to a garage and they advised changing the master cylinder which they did and it was still the s...

hi,
I had a simular problem to this and it turned out to be the connector from the wires to the printed cicuit board. Try reaching under the dash and push the plastic connecter to the circit connector It worked on mine.

Hi everyone, just a question about a 1.9 dg engine really. I just got a (spare) engine to rebuild for our camper only £25 from fleabay. Today we stripped it down and found that it is in excellent condition apart from a crack on each head between the valves( 2 per head), these cracks have not gone in...

I had this problem after changing the little lights for the insterment panel, the red water light came on if you turned the lights on the red light went out. After a lot of head scratching i found that if you reached up under the dash to where the main wiring harnes plugs onto the insterment panel (...

I had the same problem :evil: we changed the fan senser on the radiator which made the fan work but the temp gauge was still high in the end we resorted to the haynes book of lies, after it was suggested that it could be an air lock in the rad. bleeding the rad is akin to bleeding one at home (excep...

me too I have rover 612 (I think) leather and electric bit taller but very comfy £10 each from the scrap yard

Hi with this hot weather of late my temp reading is showing at 3/4 is this usaul? I have changed the thermostat and the thermo switch at the rad (the fan now works). the temp seems to go no higher even after we took it for a long run. CHEERS MARK and PAULINE

do'es enyone know where to get spares for a camping gaz t 168 fridge, I need the burner unit and jet as the small jet at the end of the pipe blocked and we managed to snap the pipe off in the end of the burner

I used to do this for a living and I would say that a little heat (hairdrier) or if your really brave a heat gun ( not recomended if you havn't done this before) is best for removing old vinyl. if any of the glue is left then lighter fluid (lighter petrol) is the best for removing this. good luck