Club 80-90 Forums

Thanks all for your advice, I will check the thickness of the drums and replace as necessary.

In regards to the backplate, could I have a measurement on where to drill, and what size drill bit to use? I fancy drilling this hole so I can get to the adjuster.

Thanks very much for all help.

Hi there,

Any techniques for running the carb through in case it is blocking?

I've added some fresh fuel.

Hello, Has anyone come across a T25 without a star adjuster hole either in the backplate or the drum to adjust up the drum brakes? Can an adjuster hole be drilled into existing drums, if so what are the measurements to place the hole and how big should the hole be? I might go to a machine shop to ge...

Will steve irwin bolt grip fit j bend nut early lh exhaust manifold?

Or am I wasting me money!

Will let you know later!

X

Irwin on the lower nut?

http://i1059.photobucket.com/albums/t439/shinybicycle/20140717_213831_zpsbc8f7609.jpg How about the bolt inside the bend? Early exhaust! If I can't get an 11mm irwin on it then there's no point me buying them at this stage! I think I might be able to wedge it on and use a spanner on the irwin magic...

Is there enough space to get an irwin nut remover on the exhaust manifold nuts in situ on the van?

That's it really! Are zinc plated bolts as good as stainless!?

I've just had a read and they're nowhere near as good as stainless for corrosion resistance!

The bolt head says ty88.

Ok I've been out there in the abyss! Thanks for your patience!

Can I get an irwin 11mm bolt grip and a spanner onto that lower nut without cutting the pipe!

It's touch and go! Maybe I might go the weld patch up option for now! Pictures coming!

Cheers, but it's for splashplate! Still the same?

Also is zinc coated as good as stainless?!

Just in case they need replacing! Anyone!

Hi there! I urgently need to know what nuts and bolts are needed for the twin piston, early (non sliding type) front brake disc splashplate! Thanks!

But alex with the hex headed worm studs you could just turn them out and drop the j tube, but it sticks to the muffler connecting piece? I just have to replace the j tube but it's broken near the muffler connection, so I have to get the j tube off the studs, the old nuts off and open the muffler con...

I'm gonna try it this time around!