Club 80-90 Forums

Thanks for your help guys, much appreciated.

So its just a matter of loosening off each of the 5-6 nuts/bolts underneath, then lift and it pulls off?

This might seem a stupid question, but thought I'd ask before tackling just in case I goabout it the wrong way and ruin the side trim. On my 1991 T3 Multivan it is fitted with the standard body kit. I need to remove the side trim on the non sliding door side, do I just need to undo the bolts from un...

Stick garage airline with rag around it, give it a quick blast with bleed screw out. top up and put screw in with water coming out. 2 person operation. Dont over pressurise. Pete. I presume you mean put the air line in the header tank then give it a blast to get the water to come out of the bleed s...

I had another tinker last night and tried a slightly different approach just to make sure it can't be bled. To avoid peeing off the neightbours by sitting revving my engine at 2000 - 3000 revs on the drive, I took it out for a spin to warm it armed with a 13 mil spanner for the bleed screw. The temp...

Thanks for the guidance Ringo, much appreciated. I was revving the engine when bleeding the rad and even took it for a drive with the bleed screw out and still no coolant comes through!!! Is this sounding like the stat?

I'm new to this forum so hi everybody. I'm hoping that you may be able to help me. I drive a T3 with 1.9 TDi AFN engine fitted. This is quite long post but please bare with me as any help would be much appreciated. Friday morning on the way to work the van overheated, this I managed to resolve as a ...